by Markus Raabe | 17.10.2018 | News, Software releases
Version 10/2018 of MESYS Shaft and Bearing analysis software is now available under Downloads. Extensions in the shaft calculation software A major extension is the possibility to consider 3D-elastic parts with elastic bearing rings and elastic gear bodies. Bearings...
by Markus Raabe | 28.09.2018 | Bearings, News
Often single values are used for radial or axial stiffness of a rolling element bearing. For some bearing types and load conditions this might be sufficient, for others it is not. What is a stiffness? Generally, a stiffness describes the change of a force for a change...
by Markus Raabe | 24.06.2018 | News, Shafts
Since version 08/2016 the MESYS shaft system calculation software allows the combination of elastic shafts calculated a 1D-beam-elements with 3D-elastic parts modeled as 3D solid elements. The 3D-elastic parts can be imported CAD geometry or defined parametrically....
by Markus Raabe | 08.04.2018 | Bearings, News, Shafts
Elastic housing deformation can have an impact on the load distribution within rolling element bearings. For many applications this is neglectable, but for large bearings or soft housings, it can be of interest to consider this effect. The MESYS shaft system...
by Markus Raabe | 04.04.2018 | Bearings, News, Seminars, Shafts
On July 3rd-4th 2018 a seminar about shaft and rolling bearing calculation is arranged in Zürich (CH). The seminar is held in English language. The contents is: Calculation of bearing life according ISO 281 and ISO/TS 16281 Calculation basics Main differences between...
by Markus Raabe | 17.01.2018 | News, Software releases
Version 12/2017 of the MESYS Software is now available under Downloads. Extensions to general program features A COM-interface was added to the software, which allows remote control of the calculations using other programs. It can be used for example to post-process...
