by Markus Raabe | 24.06.2018 | News, Shafts
Since version 08/2016 the MESYS shaft system calculation software allows the combination of elastic shafts calculated a 1D-beam-elements with 3D-elastic parts modeled as 3D solid elements. The 3D-elastic parts can be imported CAD geometry or defined parametrically.... by Markus Raabe | 08.04.2018 | Bearings, News, Shafts
Elastic housing deformation can have an impact on the load distribution within rolling element bearings. For many applications this is neglectable, but for large bearings or soft housings, it can be of interest to consider this effect. The MESYS shaft system... by Markus Raabe | 04.04.2018 | Bearings, News, Seminars, Shafts
On July 3rd-4th 2018 a seminar about shaft and rolling bearing calculation is arranged in Zürich (CH). The seminar is held in English language. The contents is: Calculation of bearing life according ISO 281 and ISO/TS 16281 Calculation basics Main differences between... by Markus Raabe | 17.01.2018 | Bearings, News, Shafts
Version 12/2017 of the MESYS Software is now available under Downloads. Extensions to general program features A COM-interface was added to the software, which allows remote control of the calculations using other programs. It can be used for example to post-process... by Markus Raabe | 03.05.2017 | Bearings, News, Shafts
The version 04/2017 of MESYS Software is now available under Downloads. The main changes are: Integration of the calculation for ball screws into the shaft calculation. This allows a combined calculation of shafts, bearings and ball screws 3D-elastic housings can be... by Markus Raabe | 02.04.2017 | News, Shafts
In calculations for shaft systems like gearboxes the shaft are often considered as one-dimensional elements for the calculation of shaft strength, bearing life and safety factors for gears. This has the advantage of short calculation time and easy consideration of... 
