by Rafael Perez | 02.09.2014 | Gears, News, Shafts
A new feature for ensuring optimum tooth flank contact is now available on the new release 08/2014 of the MESYS shaft system calculation.The teeth geometry of gear pairs can accordingly undergo either symmetric or unsymmetrical flank corrections based on three...
by Markus Raabe | 01.02.2013 | Gears, Seminars
On 15th of may a seminar for Basics and Design of Cylindrical Gears will be presented in Zürich. It will be in German language, so please check this page in German. If you are interested in an English seminar, please contact us.
by Markus Raabe | 04.04.2012 | Gears, Seminars
On 10th of july a seminar for Basics and Design of Cylindrical Gears will be presented in Zürich. It will be in German language, so please check this page in German. If you are interested in an English seminar, please contact us.
by Markus Raabe | 17.08.2010 | Gears, Online calculations
The most important dimensions of helical gear geometry can be calculated online according ISO 21771. For test dimensions like diametral dimensions over balls iterative calculations are necessary, therefore it is difficult to do these calculations manually. The free...
by Markus Raabe | 16.04.2010 | Gears
End of 2007 an ISO geometry standard for cylindrical gears was published which is mostly identical to DIN3960. There is one major difference for internal gears, which are chanracterized by a negative number of teeth in the calculation as it is dome in DIN3960....
