by Markus Raabe | 05.08.2015 | News, Shafts
If angular contact ball bearings are used the axial clearance of the system has to be determined. This article shows how the parameter variation in the MESYS Shaft Calculation can be used to determine the required axial clearence. The example shaft with diameter 10mm...
by Rafael Perez | 15.07.2015 | News, Seminars, Shafts
On October 27th 2015 a seminar about shaft calculation is arranged in Detroit (USA). The seminar is held in English. The contents is: Overview of bearing life according to ISO 281 and ISO/TS 16281 Overview of shaft strength calculation according to DIN 743 Definition...
by Markus Raabe | 10.03.2015 | News, Shafts
The relationship between the mean stress and the corresponding amplitude of the alternating stress, also known as stress ratio R, has to be defined in the shaft strength calculation according to DIN 743 for each stress component. In the case of rotating shafts, the...
by Markus Raabe | 15.02.2015 | Seminars, Shafts
On June 23rd 2015 a seminar about shaft calculation is arranged in Zurich. The seminar is held in English language. The contents is: Overview of bearing life according to ISO 281 and ISO/TS 16281 Overview of shaft strength calculation according to DIN 743 Definition...
by Rafael Perez | 02.09.2014 | Gears, News, Shafts
A new feature for ensuring optimum tooth flank contact is now available on the new release 08/2014 of the MESYS shaft system calculation.The teeth geometry of gear pairs can accordingly undergo either symmetric or unsymmetrical flank corrections based on three...
by Rafael Perez | 15.07.2014 | Shafts
Calculation templates and a short description of usual shaft system cases have been released for the user community as a useful reference point from which further development can be easily carried out. The list of the examples are as follows: Bevel gearbox...
