by Markus Raabe | 08.04.2018 | Bearings, News, Shafts
Elastic housing deformation can have an impact on the load distribution within rolling element bearings. For many applications this is neglectable, but for large bearings or soft housings, it can be of interest to consider this effect. The MESYS shaft system...
by Markus Raabe | 04.04.2018 | Bearings, News, Seminars, Shafts
On July 3rd-4th 2018 a seminar about shaft and rolling bearing calculation is arranged in Zürich (CH). The seminar is held in English language. The contents is: Calculation of bearing life according ISO 281 and ISO/TS 16281 Calculation basics Main differences between...
by Markus Raabe | 02.04.2017 | News, Shafts
In calculations for shaft systems like gearboxes the shaft are often considered as one-dimensional elements for the calculation of shaft strength, bearing life and safety factors for gears. This has the advantage of short calculation time and easy consideration of...
by Markus Raabe | 01.02.2017 | Bearings, News, Seminars, Shafts, Uncategorized
On May 16-17th 2017 a seminar about shaft and rolling bearing calculation is arranged in Atlanta (USA). The seminar is held in English language. The contents is: Calculation of bearing life according ISO 281 and ISO/TS 16281 Calculation basics Main differences between...
by Markus Raabe | 05.08.2015 | News, Shafts
If angular contact ball bearings are used the axial clearance of the system has to be determined. This article shows how the parameter variation in the MESYS Shaft Calculation can be used to determine the required axial clearence. The example shaft with diameter 10mm...
