by Markus Raabe | 27.09.2011 | Bearings
The definition of static and dynamic load capacities according ISO 76 and ISO 281 are valid for steel bearings only. Now an extension of these standards is available for hybrid bearings with ceramic rolling elements in DIN ISO 281 Supplement 5 and DIN ISO 76...
by Markus Raabe | 15.07.2011 | Bearings
For axial-radial-roller bearings (three row slewing rings) a new calculation software is available which is considering the deformations of the bearings rings.The geometry of the axial symmetric parts can be defined by a polygon and multiple rows of axial or radial...
by Markus Raabe | 31.01.2011 | Bearings
The rolling bearing analysis according ISO/TS 16281 is assuming rigid races. This is an appropriate approximation if the bearings is mounted on a shaft and surrounded by a stiff housing. In case of a track roller the external load is acting directly on the outer ring...
by Markus Raabe | 15.11.2010 | Bearings
Specially for ball bearings some extensions of the rolling bearing analysis software ar available unter downlads. The required shoulder height of the bearing is calculated using the extension of contact ellipsis. The comparison with the optionally user provided...
by Markus Raabe | 21.09.2010 | Bearings
A new version of the software for rolling bearing analysis according ISO/TS 16281 is available. The main changes are the analysis of tolerances and the possibility for calculation of groups of bearings. The bearing clearance can be defined according ISO 5753 C2-C5 in...
by Markus Raabe | 02.07.2010 | Bearings, News
The calculation of rolling bearings according ISO/TS 16281 is now also available as windows program. In difference to the life calculation according ISO 281 the calculation of reference life according ISO/TS 16281 is also considering the tilting of the bearing and the...
