by Markus Raabe | 05.08.2015 | News, Shafts
If angular contact ball bearings are used the axial clearance of the system has to be determined. This article shows how the parameter variation in the MESYS Shaft Calculation can be used to determine the required axial clearence. The example shaft with diameter 10mm...
by Markus Raabe | 10.03.2015 | News, Shafts
The relationship between the mean stress and the corresponding amplitude of the alternating stress, also known as stress ratio R, has to be defined in the shaft strength calculation according to DIN 743 for each stress component. In the case of rotating shafts, the...
by Markus Raabe | 15.02.2015 | Seminars, Shafts
On June 23rd 2015 a seminar about shaft calculation is arranged in Zurich. The seminar is held in English language. The contents is: Overview of bearing life according to ISO 281 and ISO/TS 16281 Overview of shaft strength calculation according to DIN 743 Definition...
by Markus Raabe | 15.02.2015 | Bearings, Seminars
On June 22nd 2015 a seminar about rolling bearing calculation is arranged in Zurich. The seminar is held in English language. The contents is: Calculation of bearing life according ISO 281 and ISO/TS 16281 Calculation basics Main differences between the methods Load...
by Markus Raabe | 16.12.2014 | Uncategorized
The MESYS office is closed from December 22nd to January 4th. Emails will be read occasionally. We wish you Merry Christmas and a good start into 2015!
