# Table for shafts

> [HTML Version](table_for_shafts.html)

A table for shafts is showing results for each shaft:

(./images/all_img130.png)

Available results are:

- 'n': shaft rotation speed

- '∑T': sum of all torques with the same sign

- '∑P': sum of all power inputs with the same sign

- 'minL10rh': minimum reference life L10rh according to [ISO 16281](bibliography.md#iso_16281) for all bearings on this shaft. Alternatively L10h according to [ISO 281](bibliography.md#iso_281) is shown.

- 'minL10rh': minimum modified reference life Lnmrh according to [ISO 16281](bibliography.md#iso_16281) for all bearings on this shaft. Alternatively Lnmh according to [ISO 281](bibliography.md#iso_281) is shown.

- 'pmax': maximum contact stress for bearings

- 'minS0eff': minimum static safety factor according to [ISO 17956](bibliography.md#iso_17956) for all bearings on this shaft

- 'maxSigV': maximum equivalent stress with in this shaft

- 'SD': safety for fatigue according to [DIN 743](bibliography.md#din_743_1) for this shaft

- 'SS': static safety factor according to [DIN 743](bibliography.md#din_743_1) for this shaft

- 'maxUr': maximum radial displacement of the shaft

- 'mass': mass of this shaft

- 'Jxx, Jyy, Jzz': moments of inertia of the shaft