# Table for sections

> [HTML Version](table_for_sections.html)

The table for sections shows details for each section for every shaft. The type of notch effect is shown, safety factors for strength, forces, moments and displacements:

(./images/all_img131.png)

Available results are:

- 'SD': safety for fatigue according to DIN 743 for this section

- 'SS': static safety factor according to DIN 743 for this section

- 'Fx, Fy, Fz': forces in the section of the shaft. For faces of elastic parts the force is acting onto the part.

- 'Mx, My, Mz': moments in the section of the shaft. For faces of elastic parts the force is acting onto the part.

- 'ux, uy, uz': axial and radial displacement for this position

- 'rx, ry, rz': torsion and tilting angles for this position

- 'cxx, cyy, czz': stiffness of the system reduced to this point. The reciprocal of the main diagonal of the compliance matrix is shown.

- 'crx, cry, crz': rotational stiffness of the system reduced to this point. The reciprocal of the main diagonal of the compliance matrix is shown.