Show/Hide Toolbars

MESYS Calculation Software

 

all_img392

On the pages “Graphics1” and “Graphics2” the results can be shown as graphic.

If the parameter list was generated by “Generate list” and no more than two input parameters are used, lines are used for the diagram. For more parameters or other sources just points are shown.

The line charts of the chosen outputs can be overlapped so that the user can easily perform any comparisons. The graphic area consists of two different y-axis, thus being possible to compare different types of output results (units) at a time. Furthermore, although the basic combined life (L10rh) for a ball screw with two nuts is being primarily analyzed in the graphic, by doing a click on the all_img3-button, it could also be possible to add any other analyzed outputs with the same units of one of the two available y-axis; like the L10rh for any of the nuts, shown in the example of the picture above.